How to Measure Your Dining Table for Custom Table Pads: Step-by-Step Guide
לַחֲלוֹק
Getting custom table pads that fit perfectly starts with accurate measurements. Whether you have a rectangular, round, or oval dining table, this comprehensive guide will walk you through the exact steps to measure your table correctly.
Why Accurate Measurements Matter
Custom table pads are designed to fit your table precisely, providing maximum protection while maintaining the beauty of your furniture. Incorrect measurements can result in pads that are too small (leaving edges exposed) or too large (creating an awkward overhang).
What You'll Need
Before you start measuring, gather these simple tools:
- Measuring tape (at least 10 feet long)
- Paper and pen to record measurements
- A helper (optional but recommended for larger tables)
How to Measure a Rectangular or Square Table
Step 1: Measure the Length
Place your measuring tape at one end of the table and extend it to the opposite end. Measure from edge to edge, not including any overhang or decorative elements. Record this measurement.
Step 2: Measure the Width
Measure across the narrowest part of your table from edge to edge. For rectangular tables, this will be the shorter side.
Step 3: Check for Table Leaves
If your table has extension leaves, measure both with and without the leaves in place. Custom table pads can be made to accommodate your table in both configurations.
Pro Tip Always measure in inches and round to the nearest 1/16 inch for the most accurate fit.
How to Measure a Round Table
Step 1: Find the Diameter
Measure straight across the center of your round table from edge to edge. This is your diameter.
Step 2: Verify the Measurement
To ensure accuracy, take a second measurement at a different angle across the table. The measurements should be the same.
How to Measure an Oval Table
Step 1: Measure the Length
Measure the longest distance across your oval table from end to end.
Step 2: Measure the Width
Measure the widest point across the table, perpendicular to your length measurement.
Step 3: Check the Curve
Oval tables can have different curve styles. Note whether your table has a gentle or pronounced curve, for best results a tracing of the outline is needed.
Measuring Tables with Unique Shapes
For tables with curved ends, racetrack shapes, or custom designs:
1. Measure the overall length and width
2. Take additional measurements at key points
3. Consider taking a photo from directly above to show the shape
4. Contact us with your measurements and photo for a custom quote
Common Measurement Mistakes to Avoid
Don't measure over a tablecloth - Always measure the bare table surface for accuracy.
Don't forget about table leaves - If you use extension leaves, measure with them in place.
Don't round up too much - Precise measurements ensure a better fit. Round to the nearest 1/16 inch, not the nearest whole inch.
Don't measure the apron - Measure the tabletop surface only, not the decorative trim underneath.
What Happens After You Measure?
Once you have your measurements, you're ready to order your custom table pads. Our table pads are made to your exact specifications with:
- MagnaLock magnetic system for secure placement
- Heat-resistant protection up to 550°F
- Waterproof and scratch-resistant surface
- Custom fit for your table shape and size
Need Help with Measurements?
If you're unsure about your measurements or have a uniquely shaped table, our team is here to help. Contact us with your measurements and any questions – we'll make sure you get the perfect fit.
Ready to Protect Your Table?
Now that you know how to measure your table accurately, you're ready to order custom table pads that will protect your investment for years to come.
---
Have questions about measuring your table? Contact our team for personalized assistance. We're here to help you get the perfect fit!